EF1200
The 1000 Series Wide Stile Exit Devices and Trims are designed for new or retrofit installations with other manufacturers’ devices. The push bar assembly features a smooth, low-profile design to minimize catch hazards. The device function is field-selectable based on the chosen trim type. A full range of lever trims is available in various architectural finishes. The 1000 Series complies with the highest safety and security standards in the industry. Devices and trims are UL/cUL listed for Panic Hardware or Fire Hardware and are certified to ANSI/UL305 and ANSI/BHMA A156.3 Grade 1. The 1000 Series offers superior durability for high-impact applications such as offices, schools, banks, assisted living facilities, and other institutional or commercial buildings.
FEATURES
- For all types of wide stilesingle and double doors.
- For new or retrofit installation into other manufacturers’ devices.
- For doors 1-3/4″ to 2-1/4″ thick, up to 4′ wide opening and up to 10′ high; for thicker doors, consult factory.
- Furnished Standard for 1-3/4″ thick, 3′ wide opening and 7′ high doors.
Please contact a local sales representative in your area for more information and to get started.
Features
- For all types of wide stilesingle and double doors.
- For new or retrofit installation into other manufacturers’ devices.
- For doors 1-3/4″ to 2-1/4″ thick, up to 4′ wide opening and up to 10′ high; for thicker doors, consult factory.
- Furnished Standard for 1-3/4″ thick, 3′ wide opening and 7′ high doors.
Options
(DE) Delayed egress
(RX) Request to Exit
(ELR) Electric latch retraction
(SS) Signal switch
(AL) Alarm Exit
(LM) Latch bolt monitoring
Specifications
Certifications
ANSI/BHMA A156.3 Grade 1 Certified
UL 10C 3-hour
UL/cUL Listed for UL 305
Compliance
Meets requirements of the Americans with Disabilities Act
Meets guidelines of Buy American Act
Series
ED1000
Handing
Non-Handed
Field Reversible
Door Thickness
1-3/4" standard, other specify
Top Latch Bolt
5/8" throw, stainless steel, pullman type, deadlocking
Bottom Latch Bolt
5/8" throw, stainless steel, pullman type, deadlocking
Round Slide Bolt optional
Top and Bottom Latch Bolt Case
4-12" x 2-1/8" x 1-1/2"
Top Rod
1/2" square tube, 36-1/8" for 7' door, 48-1/8" for 8' door
Bottom Rod
1/2" square tube, 31-7/8"
Rod Extension
Available 24” for doors ranging between 8’ and 10’ high
Dogging
Not Available on Fire Exit Hardware
Device Center Line From Finished Floor
39-5/8"
Door Undercut
1/4" (6mm)
Fire Bolt
Optional, used in Less Bottom Rod for Fire exit devices
